They’ll start with the letter L and then a single number. This just shows which assembly line they were produced on and does not affect the manual. The next two numbers show the year. There will be a dash, and the next three digits are the Julian Day Number of the year the machine was made.

How do you adjust the height on a Swisher lawn mower?

Rotate height adjust crank handles (H7N) in a clockwise direction to lift the mower deck. A counter-clockwise direction is used to lower the mower deck. Make sure the height adjustment is the same at side crank handles.

Where is the model number on a Swisher mower?

The model number for the engine will be found just behind the valve cover of the engine head. All mower parts listed herein may be ordered directly from Swisher Mower & Machine Co. Inc. or your nearest Swisher dealer.

How do you start a Swisher pull behind lawn mower?

Make sure toggle switch is not turned “OFF” and safety tether is attached. Set engine throttle to “RUN” position. Move the choke lever to the “ON” position (cold engine only). With feet clear of mower deck, turn key switch to the “START” position; release when engine begins to run (12 volt models).

How do you put string on a Swisher trim N mower?

Loosely fold string in half. Place loop of string against outside of loop on the trimmer head. Bring ends around and through the loop and over the string loop. Pull ends to tighten loop.

Are Swisher pull behind mowers any good?

The good news is this mower is very good. If you are going to tow behind and ATV don’t have a ball installed and the tow bar will hook up a lot lower than the deck so you might want to get some type of extension to make the hook up to the ATV higher so you don’t bend the bar of the mower deck.

Are Swisher mowers good?

Overall Review The main selling points on the Swisher ZTR2766BS Response zero-turn mowing are its huge cutting deck and ability to move quickly even on very rough lawns. The cutting power is also excellent and the Briggs & Stratton engine is reliable and durable.

What size belt does a Swisher 44 trail mower?

50-Inch
Swisher BA50 50-Inch Belt – Fits Select Swisher 44-in, 24-in and 66-in Mowers.