3 ft
A 3 ft (914.4 mm) clear space shall be maintained around the circumference of fire hydrants except as otherwise required or approved. Hydrants – Clearances of seven and one half feet (7’6”) in front of and to the sides of the fire hydrant, with a four feet (4′) clearance to the rear of the hydrant.

Can be fire hydrants obstructed?

(1) It shall be unlawful for any person in any manner to obstruct the use of any fire hydrant or place any material or objects as to obstruct its view from the roadway or other approach.

Can you put a fence around a fire hydrant?

No fence, wall, hedge, or other structure shall be installed or maintained within 36 inches of any fire hydrant and no closer than 12 inches to any utility (e.g., street lights) or utility cabinet. 2.

What is the NFPA code for fire hydrants?

NFPA 291 provides guidance on fire flow tests and marking of hydrants in order to determine and indicate the relative available fire service water supply from hydrants and to identify possible deficiencies which could be corrected to ensure adequate fire flows as needed.

Can you plant around a fire hydrant?

In general, municipal fire codes require property owners to maintain a clearance of about 3 feet around fire hydrants. Shrubs, trees, fruit, vegetables and flowers are not to be planted inside that area.

How close to a fire hydrant can a mailbox be?

Placement Standards A minimum of 12 feet in all directions from fire hydrants must be maintained. All supports must be of sufficient strength to withstand the pressure of snow being pushed against them and constructed of material that will not quickly deteriorate, like treated lumber and iron.

Is it bad to have a fire hydrant in front of your house?

This can depend on the city, town or county you live in but generally the rule is no parking in front of a fire hydrant. Its a matter of safety really should the firefighters need water from that hydrant and a vehicle parked in front of that hydrant could delay or even prevent them from getting access to that water.

Is taking water from a hydrant illegal?

Illegal hydrant use Some individuals and companies access our hydrants, using them to take water from the network to use themselves. Hydrant misuse and vandalism is a criminal offence.

Can you pour concrete around a fire hydrant?

In loose or poor load-bearing soil, this may be accomplished by pouring a concrete collar approximately 6 inches thick to a diameter of 2 feet at or near the ground line around the hydrant barrel. Additional Information: Any additional information regarding installation of hydrants can be found in AWWA Manual M17.

What does NFPA 24 cover?

NFPA 24 helps ensure water supplies are available in a fire emergency, with detailed requirements for the installation of private fire service mains and their appurtenances supplying private hydrants and water-based fire protection systems.

What is NFPA fire Code?

NFPA 1, Fire Code, advances fire and life safety for the public and first responders as well as property protection by providing a comprehensive, integrated approach to fire code regulation and hazard management.

What can I put around a fire hydrant?

Some cities allow only lawn grass around a hydrant and require the property owner to keep it mowed short. Mulching around the hydrant with bark is another option. The property owner is responsible for clearing away fall leaves and other debris that collect near the hydrant.

How do you identify a fire hydrant?

Fire hydrants are installed in an underground chamber, and identified by above ground yellow marker posts/signs, identifying the location and size of the water main. The lid of the hydrant pit is marked with the letters F H. Fire hydrant cover and hydrant marker plate These covers may be found in the footpath, verge or in the road way.

Are fire hydrants used for line flushing?

LINE FLUSHING The fire hydrants ease of operation and high flow capability make it a natural for use in flushing distribution system main lines. When line flushing is done in conjunction with systematic hydrant inspection, the primary function of the fire hydrant is kept in proper perspective.

Who is responsible for maintaining fire hydrants?

All public fire hydrants are maintained by the Water Division. The Water Division has prepared this document to provide guidance for conducting tests and inspections of public hydrants. This information may also be used as guidance for the operation and maintenance of privately-owned hydrants connected to the water system.

What is the maximum height of a fire hydrant?

Height of the hydrant(s) in relation to grade, measuring from the horizontal midline of the hydrant pumper connection, a minimum of 18” and a maximum of 36” to final grade / ground shall be maintained a minimum.