When your laminate or MDF counter sits adjacent to a wall, side splashes can both complete the look of your counters and provide protection for your wall paint. These side splashes are affordable, easy to install, and will provide an exact match to your chosen countertop style.

How do you use a edging strip on a kitchen worktop?

Cover the surface of the worktop with masking tape, to protect it from any excess adhesive. Apply PVA adhesive – or an appropriate contact adhesive – along the edge of the exposed composite fibreboard. Place the edging strip over the adhesive and clamp in place whilst the glue dries.

How do you hide a gap between countertops and walls?

Lay painter’s tape along the edge of the countertop and the wall just above the gap to keep caulk off these surfaces. Apply the caulk with a caulking gun. Choose a color that matches the countertop and spread a thin, continuous bead with no voids.

How do you make a countertop edge?

Stacked Edge Buildup Instructions

1. Use your excess material to cut 1″ wide strips.
2. Cut corner treatments if required.
3. Turn your countertop over and do the required prep work.
4. Place your corner treatments (if required) first.
5. Once comfortable with your dry fit, hot glue plywood stop blocks behind the buildup strips.

What is the best way to cut kitchen worktop?

A circular saw is often the best option to cut laminate worktops. Make sure the blade is sharp (replace the blade if you have been using it for a while) and suitable for fine cuts—it should cut through the worktop without any issue.

Are backsplashes necessary?

Is a Backsplash Necessary? Due to the amount of water and abuse that kitchens get, it’s highly recommended that you have a backsplash along the back of your kitchen countertop. If you have a sink counter that does not butt up against the wall (a pedestal sink, for example), your need for a backsplash is only aesthetic.

What do you put between stove and countertop?

Find a gap cover online or in hardware stores. Gap covers are long pieces of T-shaped plastic or silicone. The bottom part of the T fits into the space between the oven and the counter, while the top of the T sits flat on your stove and counter. They are available at most hardware stores or online retailers.

What is plastic worktop tile trim?

Plastic Worktop Tile Trim Worktop tile trim creates a neat transition from worktop to tiled wall. This achieved by allowing to sit under the lip of the trim, whilst finishing flush to the worktop. Available in White, Ivory and Peach.

What are worktop edging and strips?

Worktop edging and strips are perfect for adding the finishing touches to your kitchen worktop project by matching your selected worktop with the right edging and strips. We have a fantastic selection of worktop edging strips available in various colours and finishes to match our extensive selection of worktops.

How far from the wall should a worktop be scribed?

When you are scribing a worktop back to an uneven wall, the counter would likely need to have an overhang of around 20mm from the face of the cabinet doors. If the doors weren’t installed on the cabinets yet you would need to allow the thickness of the doors plus the 20mm overhang as well as allowing for the deviations or protrusions in the wall.

How to measure overhang for kitchen worktop?

If the doors weren’t installed on the cabinets yet you would need to allow the thickness of the doors plus the 20mm overhang as well as allowing for the deviations or protrusions in the wall. Therefore place your worktop on the cabinets to scribe it and measure the overhang making sure you are parallel at both ends.