Always wear safety glasses or safety glasses with a face shield while using any tool. Never wear ties, gloves, or loose clothing when working with power tools. Roll up long sleeves. Tie back long hair.

What are some safety principles when working with machinery?

Follow instructions, safe operating procedures and signage, and wear the required personal protective equipment, such as safety glasses and ear muffs. Keep the area around the machine clean and tidy to prevent slips and trips.

What are three safety rules for a shop?

Shop Safety

• Everyone must wear safety glasses in a shop environment.
• Check your clothes and hair before you walk into the shop.
• No loose clothing.
• Wear appropriate shoes.
• Be aware of what’s going on around you.
• Concentrate on what you’re doing.
• Don’t hurry.
• Listen to the machine.

What are 5 general safety rules?

Seven Basic General Industry Safety Rules

• Keep work areas clean.
• Use the proper tool for the job.
• Always wear the proper PPE for the work task.
• Never work on live equipment.
• Make sure chemicals are properly labeled and stored.
• Communicate hazards to other personnel.
• Stop work when needed to address hazards.

What are the general safety precautions?

What is the basic shop safety?

General Shop Safety Always have at least one other person present when working with machines, power tools or blades. Safety glasses must be worn at all times when around tools in use, even if you are not directly involved. Sunglasses are not substitutes for safety glasses. Only wear sport shoes or work boots.

What is the importance of safety in machine shop?

What is the Importance of Safety in Machine Shop? The Role of OSHA. The Occupational Safety and Health Act of 1970 required employers to provide a workplace that’s free of hazards and to comply with occupational safety and health Job Hazard Analysis. Identifying Dangerous Tasks and Equipment in the Machine Shop. Safety Mechanisms Should Be in Place. On-going Inspection and Training Programs.

What are the safety precaution in machine shop?

One should use the correct tools and work holding devices recommended for the process.

What are OSHA guidelines?

OSHA standards are mandatory, enforceable rules that must be followed. OSHA guidelines are voluntary recommendations for compliance with general workplace safety and training initiatives where standards have not been defined.

What are OSHA requirements?

OSHA requirements are wide reaching and provide for safety standards in all sorts of industries. For example, in construction, there are OSHA requirements for workers wearing certain clothing, hard hats, heat/flame retarding clothing, etc. depending on the specific task being performed.