Lockout and tagout devices shall be standardized within the facility in at least one of the following criteria: Color; shape; or size; and additionally, in the case of tagout devices, print and format shall be standardized. Lockout devices.

What type of lock must be used for lockout?

Keyed locks are the main type of lock used under OSHA’s 1910.147. Keyed locks are also the cheapest and safest option when it comes to lockout/tagout. It’s important to know that if your lock comes with two keys, the best practice is to dispose of the second key.

What is a lockout rule?

The term “lockout tagout” refers specifically to procedures used to ensure that equipment is shut down and inoperable until maintenance or repair work is completed. They are used to keep employees safe from equipment or machinery that could injure or kill them if not managed correctly.

Who needs lockout/tagout training?

Retraining must be provided whenever there is a change in an employee’s job assignments, a change in machines, equipment, or processes that present a new hazard, a change in the energy control procedures, or whenever an employee demonstrates a lack of knowledge or skill in lockout/tagout procedures.

What does it mean to lock out machinery or equipment?

“Lock-out” is the term applied to a system or procedure designed to control all situations where the unexpected energization, start-up, or release of stored energy of the equipment, machinery or process, would be likely to endanger or injure any personnel.

What is considered an energy isolating device?

Energy Isolating Device: A mechanical device that physically prevents the transmission or release of energy. This includes: Valves, Breakers, Switches; Blank Flanges for piping systems; Restraining Devices to prevent movement of parts; etc.

What requirement must be met if a tag will be used by itself on equipment that Cannot be locked out?

By themselves, tags cannot sufficiently prevent an individual from starting a piece of equipment while another individual is servicing it. Because of this, tags should only act as temporary warnings until the hazardous equipment can be properly locked. Tags must be securely attached, legible and understandable.

What is an employee lockout?

A “labor lockout” describes when the management of a company denies its workers physical access to their place of employment and hires replacement workers in their absence.

Does OSHA require lockout/tagout training?

Paragraph 1910.147(c)(7)(i)(A) of the Lockout/Tagout standard requires that “[e]ach authorized employee shall receive training in the recognition of all potentially hazardous energy sources, the type and magnitude of energy in the workplace, and the methods and means necessary for energy isolation and control.” The …

Is it acceptable to just provide lockout devices?

It is not acceptable to just provide lockout devices – they must adhere to standards and must be durable enough to prevent removal without the use of heavy-grade tools. Under section (c) (5) (ii) (C) (1-2), this is defined by OSHA as:

When does an energy isolating device have to accept lockout devices?

After January 2, 1990, whenever replacement or major repair, renovation or modification of a machine or equipment is performed, and whenever new machines or equipment are installed, energy isolating devices for such machine or equipment shall be designed to accept a lockout device. 1910.147 (c) (3)

What is the difference between lockout and tagout?

Lockout is usually accomplished with a keyed lock holding an isolating device in an “off” position. Tagout, which is often used when lockout can’t take place, uses tags to warn people that the equipment and isolating device may not be operated.

What is an OSHA lockout device?

Under section (c) (5) (ii) (C) (1-2), this is defined by OSHA as: “Lockout devices shall be substantial enough to prevent removal without the use of excessive force or unusual techniques, such as with the use of bolt cutters or other metal cutting tools.”