Find the on and off switch on the front of the ice maker’s PC board and turn the machine off. Unplug the refrigerator and wait five minutes before plugging it back in. Turn the ice maker back on and return the cover plate.

What would cause my ice maker to stop working?

Cause: A common cause for a clog is frozen water in the line. Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).

How do I reset my Sub Zero ice maker?

See Ice Maker Fill Tube Frozen. After freeing obstructions, turn the unit off, then on again to reset. If ice production stops often with the use of a reverse osmosis system or well water, a pressure booster or regulator may improve performance.

Why is my Kenmore ice maker not working?

The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice.

How do you fix a Kenmore ice maker?

To change wire harness: remove motor cover, press in on release tab with flat head screw driver, connect appropriate wire harness. 3. Connect new ice maker to wire harness in freezer. 4. Place ice maker on wall with water fill tube in water fill cup. 5. Replace lower screw and tighten top screws on ice maker.

Why is my Kenmore fridge not making ice?

Freezer Temperature is Above 10 Degrees F (-12C) If the freezer temperature is above 10 degrees Fahrenheit (-12C),the ice maker will not produce ice cubes efficiently.