It’s highly accurate, so the process is quick and easy. If you don’t want to spend so much on a thermometer, get a couple digital thermometers and average the temps. That’s what i use also. Plus i have a glass one and run dual probes on my apex along with a JBJ true temp.

Where should I put my apex probes?

Ideally, you should place your probe in a probe holder of some sort designed to hold it in place. When placing your probe in the sump, make sure the lower end of the probe is fully submerged, but the wire end is above the surface of the water.

How do I set up an apex probe?

Calibrating Probes

1. 1) Click the Configure icon to expand to reveal more settings.
2. 2) Click the Inputs Icon.
3. 3) Select pH probe. It will redirected to the pH configuration page.
4. 4) Select Automatic Probe Calibration. Follow the instruction on the screen.
5. 5) Click the Dashboard icon.

How fast can I lower salinity?

Just don’t drop more than . 001 at a time and wait at least a few hours or more before you drop it further and try to do each stage as slowly as possible. Most fish can handle even faster salinity drops if it’s done slowly via drip methods however . 001 per day is safe for all inhabitants.

How do you clean apex conductivity probe?

For cleaning the actual probe, you want to use a soft bristle brush and becareful not to crack the glass frit (for pH probes) or break the platinum tip (ORP/Salinity probes) when brushing.

Can Apex probes be submerged?

That Apex guy The probes can be submerged, but over time the cable will become brittle.

Can Apex probes be completely submerged?

Yes. The oH and ORP have to be partially submerged anyway. The cond probe can either be fully or partially submerged as long as the hole on the side is below water with a margin of safety.

Can I use Hanna’s general purpose cleaning solution on my apex probes?

Note: Neptune Apex temperature probes will not work with the probe … Hanna’s General Purpose Cleaning Solution is great for cleaning electrodes on your Apex, ReefKeeper and BRS pH and ORP probes. Clean the liquid junction of your electrodes once a day or at least once a week to prevent clogging and to maintain accuracy.

How do I monitor and control my apex?

Fusion gives you the ability to monitor and control your Apex from anywhere in the world. Apex Control System The new Apex’s Head Unit now includes the ability to have salinity monitoring, pH, ORP,… …module will allow your Apex Controller to notify you if water ever touches the sensor.

What is the MPR – magnetic probe rack?

Neptune Systems designed the MPR – Magnetic Probe Rack specifically for the Apex. It will hold the larger diameter temperature probe, pH probe, ORP probe, and salinity probe. Made from acrylic and with strong neodymium magnets Works securely on sumps and aquariums up to 1/2″ thick Dimensions – 4″…

What kind of apex ready lights are available?

There are many Apex Ready light choices available. Some of the wireless lights like those from AquaIlluminations and EcoTech Marine even have their own Apex control modules (AWM and WXM). Includes the newly released Advanced…